Today is the day for the big cut, on my original canopy. Even though the front is cracked and I won't be using it, I'm still using all the care and precaution I can, because I need the back piece. I also want the experience before making the same cut on the replacement canopy. So I started out by laying down about 3 layers of masking tape on either side of the sharpie mark that I made yesterday. This leaves a groove of sorts to help guide you while making the cut.
.JPG)
Here's a closeup, showing the tape and the cut line marked and ready to go.
.JPG)
Cutting disk in hand, I proceeded slowly and carefully. A little while later, here we are. This turned out very well. No problems.
.JPG)
It feels good to have the back window rough-cut and ready to finish. I'll set it aside for now, though.
<< Previous | Home | Next >>