COMPUTORQ 3 Electronic Torque Wrench

The COMPUTORQ3 Electronic Torque Wrench is a simple to use digital readout wrench that displays real time torque values in any of four torque units, ft.lbs., in.lbs., Nm, kg.cm.  Simply set the desired torque value and apply force until the green LED illuminates. Great for light industrial, automotive, motorcycle, watercraft and aircraft applications.	Easy as 1, 2, 3 1. READY - Set limits. 2. GET SET - Set the torque and units 3. GO - Use it!
FEATURES
• Sleek New Design • 15-Degree Flex Ratcheting Head • Push Button Socket Release Head • Large, Easy to Read Digital Display • Long Battery Life, Uses 2 Each CR123 Lithium Batteries • Ergonomically Designed Molded Nom-Slip Rubber Grip • Torques in Both Clockwise and Counterclockwise Directions • Battery Saving Auto-Shutoff After Two Minutes • COMPUTORQ3 Remembers Last Unit and Torque Setting Selected • Audible Tone Sounds when Set Torque Value is Reached, if the Set Torque Value is Exceeded, an Alarm Tone will Sound. • 3 Color LED Light Bar YELLOW LED Indicates Approaching Desired Torque Setting GREEN LED Indicates Desired Torque Value is Reached RED LED Indicates Fastener was Overtorqued, Loosen and Retighten.	• When Desired Torque Value is Reached, Display will Hold Value and Flash for Ten Seconds. • COMPUTORQ3 will Operate in any of Four Torque Units, Foot Pounds (Ft. Lbs.), Inch Pounds (In. Lbs.), Newton Meter (NM) or Kilogram Centimeter (Kg. CM.). • ACCURACY: ± 2% CW of Readings from 20% to 100% of Full Scale ± 3% CCW of Readings from 20% to 100% of Full Scale • N.I.S.T. Traceable Certificate of Calibration Included
THREE MODELS TO CHOOSE FROM TO COVER A WIDE RANGE OF TORQUE APPLICATIONS:

Sorry, quantity discounts not available on Computorq 3 torque wrenches.

COMPUTORQ II Electronic Torque Wrench The COMPUTORQ II is our state-of-the-art Digital Programmable Torque Wrench. It has many applications, including precision torquing of critical fasteners, tracking applied torque for quality control testing, as well as destructive component testing. The Computorq II is easy to program using the soft touch keypad. Simply program a “target” torque including upper and lower limits, and the wrench will signal with a beep when that torque setting is reached. If the user exceeds the target torque, an alarm tone sounds and the red light fl ashes. Computorq II is available in six models with ranges from 5 in. lbs. up to 1000 ft. lbs.II is available in six models with ranges from 5 in. lbs. up to 1000 ft. lbs. Features • Up to 4000 torque values can be stored in memory • Downloading capability to a printer/computer datalogger via RS232 • Selectable modes of operation are “peak hold” and “track” • Target torque values are easily programmed and viewed through the keypad • Available torque ranges from 5 in. lb. to 1000 ft. lb. • A 9v alkaline battery is standard for 60 hours of operation • Accuracy: ± 1% of indicated value, CW & CCW, from 20% to 100% of full scale; ± 1%, plus 5 increments from 10% to           20% of full scale • All calibration data is stored in the microprocessor • Selectable baud rate for downloading to a printer/computer/datalogger.  Options are 300, 600, 1200, 2400, 4800, 9600, or 19200 • Meets or exceeds ASME B107.28 – 2005 Computorq II Electronic Torque Wrenches Product Code Drive Torque Range Incr. Length In. Wt. Lbs. 501CI-II ¼” 5 – 50 in lb .01 in lb 13.5 1.5     .4 – 4.2 ft lb .001 ft lb         5.6 – 56 dNm .01 dNm         .56 – 5.6 Nm .01Nm         5.7 – 57 cmkg .01 cmkg         .057 - .57 mkg .001 mkg     2502CI-II ⅜” 25 – 250 in lb .1 in lb 14.9 2.0     2 – 20 ft lb .01 ft lb         28 – 282 dNm .1 dNm         2.8 – 28 Nm .01 nm         29 – 288 cmkg .1 cmkg         .29 – 2.88mkg .001 mkg     502CF-II ⅜” 60 – 600  in lb .1 in lb 14.9 2.0     5 – 50 ft lb .01 ft lb         68 – 677 dNm .1 dNm         6.8 – 67.7 Nm .01 nm         69.1 – 691 cmkg .1 cmkg         .7 – 6.9 mkg .001 mkg     2503CF-II ½” 300 – 3000 in lb 1 in lb 21.5 3.2     25 – 250 ft lb .1 ft lb         340 – 3380 dNm 2 dNm         34- 338 Nm .1 Nm         34440 – 3400 cmkg 2 cmkg         3.4 – 34 mkg .01 mkg     6004CF-II ¾” 720 – 7200 in lb 3 in lb 46.5 9.5     60 – 600 ft lb .2 ft lb         810 – 8130 dNm .1 ft lb         81 – 813 Nm .1 Nm         830 – 8300 cmkg 4 cmkg         8.3 – 83 mkg .01 mkg     10005CF-II 1” 100 – 1000 ft lb .1 ft lb 74.0 19.0     135 – 1355 Nm .1 Nm         14 – 138 mkg 1 mkg     Optional Cables: Product Code P113-50 Computorq to 9 Pin P.C. Optional Cables: Product Code P113-60 Computorq to 25 Pin Printer   N.I.S.T. traceable calibration certificate included.   Torque & Angle Electronic Torque Wrenches FEATURES • Accuracy is +/- 2% CW, +/- 3% CCW of indicated value • Gyro chip senses 360° of movement, and is accurate to within +/- 3.8° • No maintenance, just change batteries at 80 hours • VERY easy to set up and use quickly • Almost impossible to over torque • Digital torque measurement and digital angle measurement in one convenient package • Ergonomic non-slip cushion grip • 15% Flex Ratchet head • Long battery life, uses two CR123 lithium batteries • Convenient, push button socket release ratchet head • 3 step LED visual signal system: Yellow Light = approaching target torque Green Light = target torque reached Red Light = over torque indicator • N.I.S.T. traceable certifi cate of calibration included The CDI Torque and Angle Electronic Wrench incorporates 21st Century Technology in a simple to use digital wrench. Specifically designed to meet the needs of the torque professional where torque plus angle is required. It features three units of torque, ft.lbs. In.lbs. and Nm as well as the angle mode. The Torque and Angle wrench allows the technician to apply a specifi c torque load, followed by the angle specification, all in one convenient wrench. It features a three LED light bar and audible buzzer. As the angle mode is a separate function, the wrench can also be used as a stand alone digital torque wrench.   Product Code Drive Ft Lb In Lb Nm Angle Length In. (mm) Wt. Lbs (kgs) 1002TAA ⅜” 10 – 100 120 – 1200 12.6 – 135.6 0 -360° 17 (432) 2.2 (1.0) 2503TAA ½” 25 - 250 300 - 3000 33.8 - 338 0 -360° 27 (686) 3.5 (1.59) Heavy Duty Torque & Angle Torque Wrench LEADING THE WAY IN HEAVY-DUTY TORQUE AND ANGLE APPLICATIONS WITH INNOVATIVE SOLUTIONS THAT MAKE A DIFFERENCE IN DOING THE JOB RIGHT. The CDI 600 ft.lb. Heavy-Duty Torque & AngleTM Torque Wrench eliminates the need for angle gauges and protractors, providing the most accurate and efficient way to achieve torque plus angle tightening sequences now specified by many manufacturers. The digital readout displays a torque setting then with a push of a button, switches to the angle mode. Angle readout not affected by ratcheting. Angle calculation based on the same gyroscopic technology that maintains helicopters at level flight. • Torque Accuracy: (2% CW & 3% CCW FROM 20 – 100% F.S.) (4% CW & 6% CCW FROM 10 – 19% F.S.) • Angle Accuracy: ± 3.8% of indicated value • Angular Display Resolution: 1° • Torque Units: ft.lb., in.lbs., Nm • Audible (tone) Preset Alerts • Display Resolution: 0.1 ft.lb., 0.1 Nm, 1 in.lb. • Comfortable non-slip grip handle • Sealed Ratchet Head • 4 “AA” Alkaline Batteries Included • Low Battery Indicator and Auto Shutoff after two minutes idle • Operating Temperature: 40 - 110° F. (5 - 42° C) • Storage Temperature: 0 - 122° F (-20 - 50° C) • Humidity up to 90% non-condensing • EU/CE-DE, ES, FR, IT, NL, PT, UK and Japanese language manual • Certificate of N.I.S.T. traceability for 20% to 100% of full scale • Includes storage case Product Code Drive Ft Lb In Lb Nm Angle Length In. (mm) Wt. Lbs (kgs) 6004TAA ¾” 120 – 600 1440- 7200 156 – 780 0 -360° 49 (1244.6) 14 (6.35)

Shop for other type torque wrenches here.

Please call 1-800-653-0857 or email for latest pricing! Quantity discounts available.

Home  |  Sales  |  Torque  |  Calibration  |  Repair  |  Contact  |  Links  |  Terms  |  Blog

Rush service is available to insure your workload is uninterrupted.
We now offer Torque Wrench Calibration On Site
Please call or email for details.