Loading

Windows: Setup Eudora 7

Eudora 7 Setup:

  1. Open up Eudora 7.

  2. Click on Tools at the top and click on Options.



  3. Select the Getting Started on the left side. On the right side fill out the information as follows:

    Real Name:
    This is what you would like people to see when you e-mail them. I.E., Your name, Company name, Nick name, etc.

    E-mail Address: Your full e-mail address.

    Mail Server (Incoming): Enter mail.iinet.com

    User Name: Your full e-mail address.

    SMTP Server (Outgoing): Enter smtp.iinet.com

    Check the box that says Allow Authentication.



  4. Select the option on the right side that says Sending Mail, on the right side the E-mail address: should have your full e-mail address in it. The Domain to add to unqualified addressess: should stay blank. SMTP Server should say smtp.iinet.com and SMTP Relay personality: should say None. The only boxes that should be checked are; Allow Authentication, Immediate Send, and Send on check. The drop down box below will say Required, STARTTLS. Then press OK.


    Note: Some other ISP's ( I.E. Comcast, Qwest, Century Tel and many others.) Tend to block port 25 to all outgoing mail servers except there own. If you have any issues you can try Port # 587 As a last resort, if all else fails, you can convert back to port 25; however port 25 will only work if you are connected to the Infinity Internet Network.



  5. The first time you send or receive mail it will prompt your for your password. If you do not know this you can contact our technical support for assistance with this. Our contact information is located > HERE < .You are now setup, enjoy your e-mail account. If you have any other issues you can find additional support articles at http://support.iinet.com/

    NOTE* Eudora is no longer maintained by its creator, We highly suggest updating to a new e-mail client such as Thunderbird Which can be downloaded for free from http://www.mozilla.com/ *NOTE

Article ID: 615

Was this article helpful?

Yes   No  

Return to Customer Support Homepage Return to Customer Support Homepage
Printer Friendly Page Printer Friendly Page